Block Scan Winbox and Neighbour Mikrotik

Posted by admin under MIKROTIK TUTORIAL

1. Block Scan Winbox and Neighbour Mikrotik

Apart from Protected router from the virus with configuration in firewall mikrotik , the network administrator also could protect router from scan winbox and neighbor. this was the matter that was important in the network, Along With was the method that most was easy:

copy and paste this script in console mikrotik

admin@mikrotik] interface bridge> filter print
Flags: X - disabled, I - invalid, D - dynamic
0 ;;; block discovery mikrotik
chain=forward in-interface=ether1 mac-protocol=ip dst-port=5678
ip-protocol=udp action=drop
1 ;;; block discovery mikrotik
chain=input in-interface=ether1 mac-protocol=ip dst-port=5678
ip-protocol=udp action=drop
2 ;;; block discovery mikrotik
chain=output mac-protocol=ip dst-port=5678 ip-protocol=udp action=drop
3 ;;; block discovery mikrotik
chain=input in-interface=ether1 mac-protocol=ip dst-port=8291
ip-protocol=tcp action=drop
4 ;;; block winbox mikrotik
chain=forward in-interface=ether1 mac-protocol=ip dst-port=8291
ip-protocol=tcp action=drop
5 ;;; block request DHCP
chain=input mac-protocol=ip dst-port=68 ip-protocol=udp action=drop
6 ;;; block request DHCP
chain=forward mac-protocol=ip dst-port=68 ip-protocol=udp action=drop
7 ;;; block request DHCP
chain=output mac-protocol=ip dst-port=68 ip-protocol=udp action=drop
2. Recorded all of IP scanner

To be able to router recorded all of IP scanner and afterwards was put into the IP Address list and was named in group “port scanner”, along with rule in firewall him:

- Script First

add chain=input protocol=tcp psd=21,3s,3,1 action=add-src-to-address-list address-list=”port scanners”
address-list-timeout=2w comment=”Port scanners to list ” disabled=no

- Script two

add chain=input protocol=tcp tcp-flags=fin,!syn,!rst,!psh,!ack,!urg
action=add-src-to-address-list address-list=”port scanners”
address-list-timeout=2w comment=”NMAP FIN Stealth scan”

add chain=input protocol=tcp tcp-flags=fin,syn
action=add-src-to-address-list address-list=”port scanners”
address-list-timeout=2w comment=”SYN/FIN scan”

add chain=input protocol=tcp tcp-flags=syn,rst
action=add-src-to-address-list address-list=”port scanners”
address-list-timeout=2w comment=”SYN/RST scan”

add chain=input protocol=tcp tcp-flags=fin,psh,urg,!syn,!rst,!ack
action=add-src-to-address-list address-list=”port scanners”
address-list-timeout=2w comment=”FIN/PSH/URG scan”

add chain=input protocol=tcp tcp-flags=fin,syn,rst,psh,ack,urg
action=add-src-to-address-list address-list=”port scanners”
address-list-timeout=2w comment=”ALL/ALL scan”

add chain=input protocol=tcp tcp-flags=!fin,!syn,!rst,!psh,!ack,!urg
action=add-src-to-address-list address-list=”port scanners”
address-list-timeout=2w comment=”NMAP NULL scan”

3. Script Three

add chain=input src-address-list=”port scanners” action=drop comment=”dropping port scanners” disabled=no’

——————**——————